BP Pulse · EV charging site
Melbourne Assembly Rooms
Melbourne Assembly Rooms, High Street, Melbou, Sinfin, DE73 8GJ
Melbourne Assembly Rooms is an EV charging site in Sinfin, Derby, run by BP Pulse. All 8 of its sockets are 7 kW Type 2, and the published price is £0.65 per kWh. Recorded live status shows it is usually busiest around 8 pm, and Amp Map measured 1% uptime and recorded 1 charging session here over the last 30 days. No other charging site is listed within a mile, and the nearest site with 50 kW or more is New Bridge Inn, Derby (Osprey Charging), 3.9 miles away.
Status
Out of service
Checking status…
Connectors
Type 2 · 7 kW
Reliability is the share of time each socket was not out of order, over the last 30 days.
Site information
- Operator
- BP Pulse
- Opening hours
- Not published
- Payment
- In the BP Pulse appRFID card
- Charger ID
- FC16105
- Find it
- Street View of this spot ↗
Always check directly with the charge point operator for the most up-to-date information.
Prices
| Connector | Power | Price |
|---|---|---|
| Type 2 | 7 kW | 65p per kWh |
Price at the charger, including VAT. Paying in the operator's app may cost less.
Reviews
No reviews yet. Be the first to rate this charger.
Common questions
How much does it cost to charge at Melbourne Assembly Rooms (BP Pulse)?
The listed price is £0.65/kWh. Prices can change, so check the price at the charger before you start.
How fast is charging at Melbourne Assembly Rooms (BP Pulse)?
Up to 7 kW AC via Type 2.
How many charging sockets does Melbourne Assembly Rooms (BP Pulse) have?
8 charging sockets: 8 × 7 kW Type 2. Live per-socket availability is shown on this page.
When is Melbourne Assembly Rooms (BP Pulse) busiest?
Measured from recorded socket occupancy across the week, it is typically busiest around 8 pm and quietest around 7 am. The live status on this page shows what is free before you set off.
How reliable is Melbourne Assembly Rooms (BP Pulse)?
Amp Map measured 1% uptime here from recorded live status over the last 30 days, across 1 observed charging session.
Who operates Melbourne Assembly Rooms?
Melbourne Assembly Rooms is on the BP Pulse network.
Where is the nearest charger with 50 kW or more to Melbourne Assembly Rooms (BP Pulse)?
New Bridge Inn, Derby (Osprey Charging) is 3.9 miles away in a straight line, with up to 50 kW. Check its live status before you set off.
How long does a Tesla Model Y Long Range take to charge at Melbourne Assembly Rooms (BP Pulse)?
A 10–80% charge takes about 7h 54m on the 7 kW Type 2 here, adding roughly 55 kWh (~£36 at the published price). Estimates assume a typical charge curve and a warm battery.
How long does a Tesla Model 3 Rear-Wheel Drive take to charge at Melbourne Assembly Rooms (BP Pulse)?
A 10–80% charge takes about 5h 42m on the 7 kW Type 2 here, adding roughly 40 kWh (~£26 at the published price). Estimates assume a typical charge curve and a warm battery.
How long does an Audi Q4 e-tron 50 take to charge at Melbourne Assembly Rooms (BP Pulse)?
A 10–80% charge takes about 7h 18m on the 7 kW Type 2 here, adding roughly 51 kWh (~£33 at the published price). Estimates assume a typical charge curve and a warm battery.
Chargers near this site
- Donington Park Farmhouse Hotel
- The Owl House Spa
- Crewe & Harpur, Derby
- Langley Priory
- EH - Welcome Break Derby Westbound
- EH - Welcome Break Derby Eastbound
- Fastest nearby
- EH - Welcome Break Derby Westbound · 50 kW · 4 mi